Cleaning and maintenance methods for rotary joints

1, Regularly clean and maintain the rotating joint to keep its interior clean. When installing and using new equipment, a filter screen should be installed at the front end of the joint to avoid fixation

The entry of particulate pollutants into the joint causes wear and even failure of the sealing surface of the rotating joint, resulting in leakage.

2, If the equipment is shut down for a long time, it should be turned regularly to avoid rusting inside the rotating joint and sealing surface, which may cause leakage accidents during startup.

3, Regularly add lubricating oil to the rotary joint to ensure good lubrication, reduce internal wear, and extend its service life.

4, When transmitting high-temperature liquids, the medium temperature should gradually increase to avoid emergency events such as sudden cracking.

5, Regularly inspect the rotating joint for damage, and if the sealing surface is damaged, it should be replaced in a timely manner.

6, Collision is prohibited during storage to avoid damage to the joint components.

7, The packaging is tightly sealed to prevent debris from entering. The casing and shaft of the Dublin rotary joint are supported by precision bearings, making it flexible, lightweight, and with low friction during rotation,

Liquid media can include water, oil, air, etc., and are widely used in various industries. The replacement and maintenance of worn seals are simple, eliminating the need to purchase new products and saving costs.

8, Dry rotation is strictly prohibited for rotary joint products.