Rotary Union Seals

Rotary Union Seals

The sealing structure of the rotary joint is its core component, which directly determines the sealing performance, working life and adaptability to various working conditions of the joint.

Rotary Union Seals

 

The sealing structure of the rotary joint is its core component, which directly determines the sealing performance, working life and adaptability to various working conditions of the joint. Excellent rotary joint seal construction ensures fluid media leak-free transfer between fixed and rotating components under harsh conditions such as high-speed rotation, high temperature, high pressure, and corrosive media. The sealing structure of the rotary joint and its key technical points will be analyzed in detail below.

 

1. Main seal assembly

The main seal is the first line of defense of the rotary joint to prevent fluid leakage, usually in the form of mechanical seal or packing seal. The mechanical seal uses one or more pairs of relatively rotating ring sealing surface (dynamic ring and static ring) to maintain a tight fit under the action of spring force or fluid pressure to form a liquid film seal with a small gap. Mechanical seal has the advantages of good sealing effect, long service life, adapt to high-speed rotation, etc., suitable for high pressure, high temperature and strict leakage control requirements. Packing seals rely on compression fillers (such as graphite, carbon fiber, or special synthetic materials) to cover the rotating shaft and prevent fluid leakage through the close contact between the packing and the shaft surface and the radial pressure generated by the extrusion between the fillers. Packing seal structure is simple, easy to maintain, suitable for low and medium pressure, low speed rotation and sealing materials have certain corrosion resistance requirements.

 

2. Secondary seal and dust seal

In addition to the main seal, rotary joints are often equipped with secondary seals and dust seals to enhance the overall sealing effect. The secondary seal is usually placed outside the primary seal to capture any fluid that may escape from the primary seal in small quantities, further reducing the risk of leakage. The dustproof seal is located in the outermost layer, which mainly prevents external dust and impurities from entering the interior of the joint, protects the main and secondary seals from contamination, and extends their service life. Secondary seal and dust seal can be used O-ring, V-ring, lip seal and other elastic components, or combined to form a composite seal structure.

 

3. Seal support and buffer structure

In order to ensure that the sealing components maintain a stable state during the working process and avoid seal failure due to axial or radial displacement, the rotary joint is designed with seal support and buffer structure. For example, the mechanical seal is often equipped with positioning pins, bellows, sleeves and other components for axial positioning of the dynamic and static rings; The packing box is provided with a gland, a packing press sleeve and other components to exert a constant pressing force on the packing. In addition, in order to reduce the internal stress caused by temperature changes, pressure fluctuations and other factors, the joint may be equipped with elastic elements or expansion compensation rings of special materials to absorb and release stress and protect the sealing surface from damage.

 

4. Selection of sealing materials

The reliability of rotary joint sealing structure largely depends on the selected sealing material. For different working media (such as water, oil, steam, chemicals, etc.), temperature, pressure and corrosion environment, sealing materials with corresponding temperature, pressure, corrosion and wear resistance should be selected. For example, the dynamic and static rings of mechanical seals are commonly used in high strength and high hardness materials such as cemented carbide, silicon carbide, ceramics, and so on, and the friction coefficient between materials and the thermal expansion coefficient must be considered when paired. Packing materials need to have good self-lubrication, corrosion resistance and certain flexibility, such as graphite, flexible graphite, carbon fiber reinforced graphite, polytetrafluoroethylene and so on.

 

To sum up, the sealing structure of the rotary joint is a sophisticated and complex system, including the main seal, secondary seal, dust seal, seal support and buffer structure and selected sealing materials and other elements work together to ensure efficient and reliable fluid sealing performance under complex conditions.

 

Hot Tags: rotary union seals, China rotary union seals manufacturers, factory, rotary union for plating systems, rotary union for aerospace machines, rotary union for supply chain systems, triple passage rotary union, high pressure rotary joint, exporter rotary union

Send Inquiry

(0/10)

clearall