What Are The Classifications And Characteristics Of Pressure Rotary Joints?
Jan 24, 2024
The pressure rotary joint can choose the connection method according to the working situation. The transmission medium inlet can freely choose the side or rear end according to the working situation to enter the sealing surface and sealing ring. The sealing ring is made of special materials and has a long wear life, corrosion resistance, and no leakage. There are two bearings inside the rotary joint that operate smoothly, persistently, firmly, and flexibly. The friction coefficient is small, so it can operate at high speed.
The RF type pressure rotary joint and bearing device operate on a high rigidity shaft for a long time without vibration. The shaft undergoes special heat treatment to increase the rigidity of the fixed ring. The sealing material is made of wear-resistant carbon graphite, which is impermeable and dry operation. Especially, the size of the rotating sealing surface is reduced to a minimum and even becomes closed under high pressure through our long-term mechanical experience. The RF type pressure rotary joint uses a bronze fixed ring for use in high pressure 200bar.

The RBI type pressure rotary joint is designed with a fixed ring for special mechanical functions. The closed part is made of carbon graphite, which is wear-resistant, impermeable, and operates in a dry manner. Through our long-term mechanical experience, the closed face has a good balance result.
The coolant in RLB/RLF pressure rotary joints is a special labyrinth component in parts that is very difficult to engage in rotation, especially under high-speed regulations, to prevent leakage. The two sealing surfaces are carbonized and refined to ensure guaranteed operation during the warranty period, while the wear-resistant sealing ring ensures appropriate balance during normal operation and even low wear at high speeds.
The RMB/RMF type pressure rotary joint has the characteristic of opening/closing function. The opening/closing function prevents splashing and leakage during the instantaneous engagement period when the coolant passes through. High precision. When the coolant stops passing through, the closed surface immediately opens to avoid friction. This function ensures long service life. It is important to use a labyrinth type component to prevent a small amount of liquid from leaking back
The two contact surfaces are made of tungsten carbide, which is resistant to wear and mechanical shock. Stainless steel springs are used to prevent rusting, hinder rotation, and are not affected by any changes. The direction of the coolant connection between RMB and RMF is different.
The main surface of the RHB/RHF pressure rotary joint has grooves that can help dissipate heat during high-speed rotation and have an open/closed function. When the coolant passes through the open/closed machinery, the contact surface automatically closes to prevent splashing and leakage. When the coolant terminates, the contact surface immediately opens to avoid dry friction, ensuring that the contact surface is not damaged during long-term operation. More importantly, there is a labyrinth component to prevent splashing and leakage. The two contact surfaces are made of tungsten carbide that is resistant to wear and mechanical shock. Stainless steel springs are made of stainless steel and do not rust, hinder rotation, and are not affected by any changes. The coolant connection direction of RHB and RHF is different.







