Use And Maintenance Of Rotary Joints

Jan 07, 2024

I have compiled a few points for you regarding the use and maintenance of rotary joints.

1. The rotating joint drum and the inside of the pipeline should be kept clean. Special attention should be paid to new equipment, and filters should be added if necessary to avoid abnormal wear of rotating joints caused by foreign objects
2. Due to long-term non use of the machine, scaling and rusting inside the rotary joint may occur. Please be aware that there may be jamming or dripping during reuse.

3. For those with oil injection devices, please regularly inject oil to ensure the reliability of the rotating joint bearing operation.

4. The rotating joint of the circulating hot medium should gradually generate temperature to avoid sudden temperature changes.

5. Check the wear condition and thickness change of the sealing surface (generally normal wear is 5-10mm); Observe the friction trajectory of the sealing surface to see if there are any issues such as three-point discontinuity or scratches. If there are any above mentioned conditions, they should be replaced immediately.

6. Rotating joints should be handled with care and are strictly prohibited from being impacted to prevent damage to the joint components.

7. Foreign objects are strictly prohibited from entering the interior of the rotary joint.

8. Do not let the rotary joint idle for a long time.

 

1-210323162501001