Knowing these 5 points, minor faults in high-speed rotary joints can be instantly resolved
Jan 16, 2024
In daily use, high-speed rotary joints often have small problems due to improper operation. We have compiled solutions for these small problems for our customers and friends.
Analysis of the reasons for product leakage
1. The high medium of water and hot oil does not easily cause leakage. Both hot oil and hot water can add lubrication to the bearing temperature reduction valve of the high-speed rotary joint, and the bearing will not lack oil or get stuck. So there will be no leakage.
2. Vacuum or steam medium can easily cause leakage.

Solution to product leakage issues
1. Choose high-quality bearings and high-temperature resistant grease for the high-speed rotary joint of vacuum to prevent leakage.
2. High quality bearings and high-temperature resistant butter are selected as the vacuum medium to prevent leakage.
3. If the initial installation accuracy is low, vibration may occur. Firstly, the cause should be identified and cleaned up in a timely manner, and the accuracy and scale corresponding to concentricity should be checked to ensure concentricity connection
4. When using in high temperatures, lubricating oil should be added and inappropriate rotating joints should not be used too forcefully. Dust will enter the secondary contact surface of the rotating joint friction. A filter screen or cleaning device can be installed;
5. Bellows, sealing rings, etc. will show signs of aging, damage, or deformation. It is necessary to regularly check and replace new sealing components. If the secondary sealing surface of the sealing friction is greatly worn, it is recommended to replace it in a timely manner.







