Pressure Testing in the Rotating Joint Field
Jun 13, 2025
"Pressure Testing" video in the field of rotary joints
Objectives of Pressure Testing
●Sealing Performance Detection
○Test under pressure higher than the working pressure to check for leakage at sealing rings, sealing surfaces, etc., preventing medium leakage that may cause equipment failures or safety accidents during operation.
●Pressure-Bearing Capacity Verification
○Simulate actual (or higher) pressure to confirm that the joint's structural strength and material properties meet design requirements, preventing rupture under high pressure.

Pressure Testing Process
1. Preparation: Install the joint correctly on the testing equipment, connect pipelines, and ensure the environment meets standards.
2. Gradual Pressurization: Slowly inject medium (water or oil) using a pressure test pump, increasing pressure in gradients while observing for deformation or leakage.
3. Pressure Holding: Maintain the specified test pressure for several minutes, checking pressure drop and leakage; repairs are needed if standards are not met.
4. Pressure Relief: Slowly release pressure after testing, drain the medium, and inspect for residual leakage.
Pressure Testing Standards
Standards for test pressure, holding time, etc., vary by joint type and follow industry specifications. For example, test pressure for ordinary industrial joints is often 1.5 times the working pressure, with stricter standards for special working conditions.
Significance of Pressure Testing
Timely identification of manufacturing or installation defects (e.g., improper seal installation, material flaws) prevents operational failures, reduces maintenance costs and downtime, and ensures production safety.







